Misfeed In The Transfer Unit - Kyocera KM-C4008 Operation Manual

Section 9 TROUBLESHOOTING
4
If paper can be seen on top of the conveyor unit as well,
remove the paper without tearing it.
NOTE
If the paper does happen to tear, remove any loose scraps
from inside the copier.
5
Replace the paper conveyor unit in its original position in
the copier.
6
Close the front cover.
NOTE
Be sure to hold both the left and right sides of the front
cover and close it securely.
9-10

Misfeed in the transfer unit

If a misfeed has occurred in the transfer unit, perform the following
procedure to remove the jammed paper.
* The following display will be displayed after you pull out the
paper conveyor unit in step 2.
Inch specifications
aper misfeed.
JAM
Metric specifications
aper misfeed.
JAM
1
Open the front cover.
1.Open right side of transfer unit
and remove paper if inside.
2.Open right side of paper transfer and
remove any paper.
Also look in fuser & upper cover.
3.Release transfer unit lever.
4.Open transfer unit and remove
paper if inside.
5.Close front cover.
1.Remove paper if inside
on the conveying unit.
2.Conveying unit right, fuser unit left
and upper cover, remove paper if inside
3.Release transfer unit lever.
4. ull out transfer unit and remove
paper if inside.
5.Reset the unit and close front
cover unit.