Kyocera KM-C4008 Operation Manual page 212

Section 7 COPIER MANAGEMENT
A.C.S. adjustment
Perform the following procedure to adjust the sensitivity level that
the copier will use to differentiate between color originals and
black and white originals when the A.C.S. (Auto Color Selection)
mode is selected.
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-67.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
2
Select "Auto Color Correction" ["Auto colour Correction"]
under the "Default menu" column on the left side of the
touch panel and then press the "Change #" key.
The "Auto Color Correction" ["Auto colour Correction"]
screen will be displayed.
Inch specifications
efault setting / Counter
Copy default
efault menu
Exposure mode
Exposure steps
Original image quality
Auto Color/Full-Color/B&W
Auto Color Correction
efault setting
Metric specifications
efault setting / Counter
Copy default
efault menu
Exposure mode
Exposure steps
Image quality original
Auto colour/full col./B&W
Auto colour Correction
efault setting
7-72
Language Management
MP tray
setting
Register Print
orig. size report
Language Management
Bypass
setting
Register Print
orig. size report
Setting mode
Manual
1 step
Text+Photo
Full-Color
Change #
3
Setting mode
Manual
1 step
Text+Photo
Full-Colour
Change #
3
3
Press the " " key or the " " key, as desired, to move the
arrow on the scale and adjust the sensitivity level.
Inch specifications
Auto olor orrection
Default setting - opy default
Metric specifications
End
Auto colour orrection
Counter
check
User
Adjustment
Default setting - opy default
nd
NOTES
• Selecting a lower value to have more originals detected
Counter
check
User
Adjustment
• If you want to quit the displayed setting without
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
Close
tab.
Up
own
Close
Up
own
Adjust Auto olor orrection while using Auto olor Mode.
Too much color.
Adjust auto colour criterion while you use auto colour mode.
Too much colour.
as color originals, and a higher value to have more
originals detected as black and white originals.
changing it, press the "Back" key. The touch panel will
return to the screen in step 2.
Back lose
Too much Black
Back lose
Too much B&W.