Kyocera KM-C4008 Operation Manual page 152

Section 7 COPIER MANAGEMENT
3
To set the maximum number of full color copies and
printouts that can be made in total under this ID-code,
press the "Counter limit" key and proceed to the next step.
To allow unlimited full color copying and printing, press the
"No limit" key, and to cancel full color copying and printing
privileges completely, press the "Is not permitted" key.
Then proceed to step 5.
Inch specifications
Limitation (Full- olor)
No limit
ounter
limit
Is not
permitted
Management - Management edit - New register
Metric specifications
Limitation (Full- olor)
No limit
ounter
limit
Is not
permitted
Management - Management edit - New register
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Use the numeric keys on the keypad to enter the maximum
number of full color copies and printouts that can be made
in total under this ID-code. The limit can be set to any
1-page increment up to 999,999.
Inch specifications
Limitation (Full- olor)
Limited value
No limit
ounter
limit
Is not
permitted
Management - Management edit - New register
Metric specifications
Limitation (Full- olor)
Limited value
No limit
ounter
limit
Is not
permitted
Management - Management edit - New register
5
Press the "Close" key.
The touch panel will return to the screen in step 2.
7-12
Back
Back
Back
(1~999,999)
999,999
clear
Back
(1~999,999)
999,999
clear
Scanning restrictions
Perform the following procedure when you want to set the
maximum number of originals that can be scanned under the
corresponding department ID-code.
NOTE
This setting will only be available when "On" is selected
as the "Scanner function management ON/OFF"
setting.
lose
1
Access the screen that contains the copy restriction setting
items.
(See "Accessing the copy management menu screen"
on page 7-3 or "Change restrictions for use" on
page 7-23.)
Inch specifications
Management edit
lose
Department
01
02
0001
0014
00000015
00000016
00000017
Default setting - Management
Metric specifications
Management edit
Department
01
02
0001
0014
00000015
00000016
00000017
Default setting - Management
2
Select "Scanner limitation" under the "Setting item"
column on the left side of the touch panel and then press
the "Change #" key.
lose
The "Scanner limitation" screen will be displayed.
Inch specifications
Limit in use
0007
opy limitation
Printer limitation
Limitation (All)
Limitation (Full- olor)
Scanner limitation
Fax Transm. Limitation
Default setting - Management - Management edit
lose
Metric specifications
Limit in use
0007
opy limitation
Printer limitation
Limitation (All)
Limitation (Full- olor)
Scanner limitation
Fax Transm. Limitation
Default setting - Management - Management edit
p
1st Sales Dept.
2nd Sales Dept.
3rd Sales Dept.
4th Sales Dept.
5th Sales Dept.
6th Sales Dept.
Down
7th Sales Dept.
001/010
p
1st Sales Dept.
2nd Sales Dept.
3rd Sales Dept.
4th Sales Dept.
5th Sales Dept.
6th Sales Dept.
Down
7th Sales Dept.
001/010
1st Sales Dept.
Setting item Value
On
On
No limit
No limit
No limit
No limit
1st Sales Dept.
Setting item Value
On
On
No limit
No limit
No limit
No limit
Close
Order of
indication
Limit
Mgt. Inf.
correction in use
Delete
Register
Close
Order of
indication
Limit
Mgt. Inf.
in use
correction
Delete
Register
lose
hange #
lose
hange #