Original Image - Kyocera KM-2560 Advanced Operation Manual

System Menu
6-42
• Density
• Duplex
• Combine
• Collate/Offset
•

Original Image

• Original Size
NOTE:
Refer to the Operation Guide for the Quick Setup steps.
Use the procedure below to register the Quick Setup functions.
1 Press the System Menu key.
2
Press [Copy] and [Next] of Quick Setup Registration.
3
Press [Change] of
the function to be
registered in Quick
Setup.
4 Select a key (1-6)
allocated on the
Quick Setup
Registration screen.
Press [Off] to delete
a key from the Quick
Setup.
5 Press [OK]. A confirmation screen appears. Press [Yes].
Copy - Quick Setup Registration
Change
Paper Selection :
Key 1
Change
Staple:
Key 3
Duplex : Change
Key 5
Collate/Offset : Change
Off
Original Size: Change
Off
Status
Copy - Paper Selection
Register Paper Selection function on the Quick Setup screen.
Off
Key 1 Key 2 Key 3
Key 4 Key 5
Key 6
Status
ADVANCED OPERATION GUIDE
Change
Zoom :
Key 2
Change
Density:
Key 4
Combine: Change
Key 6
Original Image: Change
Off
Return to Top Close
10/10/2007 10 :10
Cancel OK
10/10/2007 10 :10