Color / Grayscale / Monochrome Selection - Kyocera KM-2560 Advanced Operation Manual

Color / Grayscale / Monochrome Selection

ADVANCED OPERATION GUIDE
This feature allows you to select the select the color mode used for
scanning when sending images. You can select from Full Color, Grayscale
or Monochrome.
NOTE:
To scan colored 2-sided originals using the optional document
processor, you need to add memory to the machine. Contact your service
representative.
Use the procedure below to select the color mode when sending scanned
images.
1
Place the originals on the platen.
2
Press the Send key.
3 Press [Color/Image] and then [Color Selection].
4 Press either
[Full Color],
[Grayscale] or
[Monochrome].
5
Press [OK].
6
Specify the destination, and press the Start key to start sending.
Ready to send.
Place original .
Color Selection
Select a scanning color setting.
Press [OK] to display
the image.
Auto Color
Full Color
Add Shortcut
Status
Sending Functions
Destination
1
Grayscale Monochrome
Cancel OK
10/10/2007 10 :10
2-25
2