Kyocera KM-2560 Advanced Operation Manual page 37

ADVANCED OPERATION GUIDE
3
Press [2 in 1] or [4 in
1], and choose the
page layout of
Layout.
4
Press [Border Line] to choose the type of the lines to indicate page
boundaries. Press [OK].
5
Press [Original Orientation] to choose orientation of the originals, either
[Top Edge Top] or [Top Edge Left]. Then press [OK].
6 Press [OK].
7
Place the originals and press the Start key.
If the original is placed on the platen, replace the original and press the
Start key.
After scanning all originals, press [Scan finish] to start copying.
Ready to copy.
Combine
Layout
Off
2 in 1
Press [ OK] to display
Right then
the image. Down
4 in 1
Down then
Right
Add Shortcut
Status
Copying Functions
Copies
1
1
Left then
Down
None
Border Line
Top Edge Top
Down then
Left
Original
Orientation
Cancel OK
10/10/2007 10 :10
1-23