Kyocera KM-2560 Advanced Operation Manual page 201

ADVANCED OPERATION GUIDE
Auto Image Rotation
Select the default Auto Image Rotation setting. The table below shows the
available settings.
Item
Off
On
NOTE:
Refer to page 1-48 for Auto Image Rotation.
Use the procedure below to set the default Auto Image Rotation settings.
1
Press the System Menu key.
2 Press [Common Settings], [Next] of Function Defaults, [ ] and then
[Change] of Auto Image Rotation.
3
Select the default for
[Off] or [On].
4
Press [OK].
Form Overlay (Copy)
Select the default form and form density from Form Box for form overlay
for copy jobs.
NOTE:
Refer to page 1-37 for Form Overlay (Copy).
The table below shows the available settings.
1 Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults, [ ] and then
[Change] of Form Overlay(Copy).
3 Press [Select Stored Form].
Description
No Auto Image Rotation performed.
Auto Image Rotation performed.
Common Settings - Auto Image Rotation
Select the default Auto Image Rotation setting.
Off On
Status
System Menu
6
Cancel OK
10/10/2007 10 :10
6-31