Centering - Kyocera KM-2560 Advanced Operation Manual

Centering

ADVANCED OPERATION GUIDE
When you have scanned the original after specifying the original size and
sending size, depending on these sizes, a margin is created at the bottom,
left, or right side of paper. By using the centering, the image is placed with
a margin equally created at each of the page Top/Bottom and Left/Right.
Use the procedure below to center then image when sending a scanned
image.
1
Place the originals on the platen.
2 Press the Send key.
3 Press [Advanced Setup] and then [Centering].
4
Press [On].
Centering is
performed.
5
Press [OK].
6 Specify the destination, and press the Start key to start sending.
Ready to send.
Enter Destination.

Centering

Move image to center of page during scan.
Press [OK] to display
the image.
Off
Add Shortcut
Status
Sending Functions
2
Destination
1
On
Cancel OK
10/10/2007 10 :10
2-7