Kyocera KM-2560 Advanced Operation Manual page 263

Login/Logout
ADVANCED OPERATION GUIDE
4
Press [Next] of User Login Setting and then [Change] of User Login.
5 Select [Local
Authentic.] or
[Network
Authentic.]. Select
[Off] to disable user
login administration.
If you select
[Network
Authentic.], enter
the host name (62
characters or less)
and domain name
(254 characters or less) for the Authentication Server. Select [NTLM
(WinNT)] or [Kerberos (Win2000/2003)] as the authentication method.
NOTE:
If the login user name and password are rejected, check the
following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Clock time setting of the machine and the Authentication Server
If you cannot login because of the setting of the machine, login with any
administrator registered in the local user list and correct the settings.
If the server type is [Kerberos (Win2000/2003)], only domain names
entered in uppercase will be recognized.
6
Press [OK].
Once you enable user login administration, a user ID and password entry
screen appears each time you use this machine.
Log in using the procedure below.
Login
1
If the screen below
appears during the
operations, press
[Login User Name].
User Login/Job Accounting - User Login
User login administration.
Please select authentication method.
Off
Host Name
Local
Authentic.
Domain Name
Network
Authentic.
NTLM
(WinNT )
NTLM
(WinNT )
Status
Enter login user name and password .
Login
abcdef
User Name
Login
Password ********
Status
Management
Kerberos
(Win2000 /2003)
Cancel OK
10/10/2007 10 :10
Login
10/10/2007 10 :10
7-3
7