Error Handling; Switching Unit Of Measurement - Kyocera KM-2560 Advanced Operation Manual

Switching Unit of Measurement

Error Handling

ADVANCED OPERATION GUIDE
Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.
1 Press the System Menu key.
2
Press [Common Settings] and then [Change] of Measurement.
3
Select [mm] for
metric or [inch] for
inch.
4
Press [OK].
Select whether to cancel or continue the job when error has occurred. The
possible errors and what to do for the errors are as follows.
Duplexing Paper Error
Select what to do when duplex printing is not possible for the selected
paper size and media type.
Item
1-sided
Display Error
Common Settings - Measurement
Select the units of measurement for length .
English
mm
inch
Status
Description
Printed in 1-sided
Error message to cancel printing is
displayed.
System Menu
6
Cancel OK
10/10/2007 10 :10
6-17