Kyocera KM-2560 Advanced Operation Manual page 202

System Menu
6-32
4 Press [+] or [–] to
enter the form
density.
5
Press [Select Form].
6
Select the form that
you want to use and
press [OK].
NOTE:
Press [Detail] to check File Name, Storing Size (Document size),
Data Size, and Date Stored for the Form.
7
Press [OK].
Form Overlay (Box)
Select the default form and form density from Custom Box for form overlay
for box print jobs.
NOTE:
Refer to page 4-29 for Form Overlay (Box).
The table below shows the available settings.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Function Defaults, [ ] and [Change]
of Form Overlay(Box).
3 Press [Select Stored Form].
Common Settings - Form Overlay(Copy )
Set the default form overlay for copies.
Density(10 - 100)
Off
100
%
Select
Stored Form
Status
Common Settings - Select Form
Select a form.
Form for Form Overlay (Copy)
Name Date and Time
Document1 05/05/2007 09 :10
Document2 05/05/2007 09 :20
Document3 05/05/2007 09 :30
Document4 05/05/2007 09 :40
Document5 05/05/2007 09 :50
ADVANCED OPERATION GUIDE
None
Select Form
Cancel OK
10/10/2007 10 :10
Size
1.1MB
1.2MB
2.1MB
001/999
Detail
2.2MB
1.2MB
Cancel OK