Kyocera KM-2560 Advanced Operation Manual page 189

ADVANCED OPERATION GUIDE
Use the procedure below to specify the settings for error handling.
1
Press the System Menu key.
2
Press [Common Settings] and then [Next] of Error Handling.
3 Press [Change] at
the error you wish to
change the
handling.
4 Select the error handling method in the selection screen for each of the
errors and then press [OK].
5
The previous screen appears. To set the handling for a different error,
repeat steps 3 and 4.
Common Settings - Error Handling
Change
Duplexing Paper Error :
Display Error
Change
No Staple Error :
Not Stapling
Status
System Menu
Change
Finishing Paper Error :
Not Stapling
Change
Stapling Limit Error:
Not Stapling
Return to Top Close
10/10/2007 10 :10
6-19
6