Modifying The Configuration - Juniper J2300 User Manual

To move directly to the top level of the hierarchy, enter the
command. For example:
[edit protocols ospf area 0.0.0.0]
user@host# top
[edit]
user@host#
To display the configuration, enter the
show < statement-path >
The configuration at the current hierarchy level, or at the level specified by
statement-path
of the following cases displays the same level of the configuration:
[edit]
user@host# show interfaces fe-0/0/0
unit 0 {
}
[edit]
user@host# edit interfaces fe-0/0/0
[edit interfaces fe-0/0/0]
user@host# show
unit 0 {
}

Modifying the Configuration

You can modify the configuration by performing the following operations:
, is displayed. For example, entering the
family inet {
address 192.168.4.1/30;
}
family inet {
address 192.168.4.1/30;
}
Adding or Modifying a Statement or Identifier on page 150
Deleting a Statement or Identifier on page 150
Copying a Statement on page 151
Renaming an Identifier on page 151
Inserting an Identifier on page 152
Deactivating a Statement or Identifier on page 153
Using J-series Configuration Tools
top
command:
show
command in each
show
Using the CLI Configuration Editor
149