Creating User Accounts - Juniper J2300 User Manual

J-series™ Services Router User Guide

Creating User Accounts

User accounts provide one way for users to access the Services Router. (Users
can access the router without accounts if you configured RADIUS or TACACS+
servers, as described in "Setting Up RADIUS Authentication" on page 182
and "Setting Up TACACS+ Authentication" on page 183.)
The procedure provided in this section creates a sample user named
cmartin
To create user accounts:
1.
2.
3.
Table 60: Creating User Accounts
Task
Navigate to the System Login level in
the configuration hierarchy.
Create a user named cmartin who
belongs to the superuser login class.
Define the encrypted password for
cmartin.
188
Managing Users and Files with a Configuration Editor
with the following characteristics:
The user belongs to the
cmartin
The user uses an encrypted password,
cmartin
Navigate to the top of the configuration hierarchy in either the J-Web or CLI
configuration editor.
Perform the configuration tasks described in Table 60.
If you are finished configuring the network, commit the configuration.
J-Web Configuration Editor
In the configuration editor hierarchy,
select System>Login.
1. Next to User, click Add new entry.
2.
In the User name box, type
cmartin.
3.
In the Class box, type superuser.
4. Click OK.
1.
Next to Authentication, click
Configure.
2.
In the Encrypted password box,
type
$1$14c5.$sBopasdFFdssdfFFdsdfs0
3. Click OK.
login class.
superuser
$1$14c5.$sBopasdFFdssdfFFdsdfs0
CLI Configuration Editor
From the top of the configuration
hierarchy enter
edit system login
Set the username and the login class for
the user:
set user cmartin class superuser
Set the encrypted password for cmartin.
set user cmartin authentication
encrypted-password
$1$14c5.$sBopasdFFdssdfFFdsdfs0
.