Configuring Static Routes With Quick Configuration - Juniper J2300 User Manual

J-series™ Services Router User Guide

Configuring Static Routes with Quick Configuration

J-Web Quick Configuration allows you to configure static routes. Figure 75
shows the Quick Configuration Routing page for static routing.
Figure 75: Quick Configuration Routing Page for Static Routing
To configure static routes with Quick Configuration:
1.
2.
3.
288
Configuring Static Routes with Quick Configuration
In the J-Web user interface, select Configuration>Routing>Static Routing.
Enter information into the Static Routing Quick Configuration, as described
in Table 103.
From the main static routing Quick Configuration page, click one of the
following buttons: