Saving License Keys With The Cli; Verifying J-Series License Management; Displaying Installed Licenses - Juniper J2300 User Manual

J-series™ Services Router User Guide

Saving License Keys with the CLI

To save the licenses installed on the Services Router to a file with the CLI:
1.
2.
3.

Verifying J-series License Management

To verify J-series license management, perform these tasks:

Displaying Installed Licenses

Verify that the expected licenses are installed and active on the Services Router.
Purpose
From the CLI, enter the
Action
Sample Output
user@router> show system license
License identifier: li29183743
License identifier: li48293123
License identifier: li72194673
76
Verifying J-series License Management
Enter operational mode in the CLI.
To save the installed license keys to a file or URL, enter the following command:
request system license save filename | url
For example, the following command saves the installed license keys to a file
named :
license.config
request system license save ftp://user@host/license.conf
Go on to "Verifying J-series License Management" on page 76.
Displaying Installed Licenses on page 76
Displaying License Usage on page 77
Displaying Installed License Keys on page 78
show system license
State: valid
License version: 2
Valid for device: jp47859620
State: valid
License version: 2
Valid for device: jp47859620
Features:
firewall - Stateful firewall
State: valid
License version: 2
Valid for device: jp47859620
command.