Filtering Configuration Command Output; Before You Begin - Juniper J2300 User Manual

J-series™ Services Router User Guide
For more information about CLI configuration mode commands, see
the JUNOS software configuration guides.

Filtering Configuration Command Output

Certain configuration commands, such as
You can filter or redirect the output to a file by including a vertical bar (
called a pipe, when you enter the command. For more information, see
"Monitoring and Diagnosing a Services Router" on page 197.

Before You Begin

To use the J-Web interface and CLI configuration tools, you must have the appropriate
access privileges. For more information about configuring access privilege levels, see
"Adding New Users" on page 175 and the JUNOS System Basics Configuration Guide.
130
Before You Begin
Command Function
load Load a configuration from an ASCII configuration file or from terminal input.
rollback Return to a previously committed configuration.
save
Save the configuration to an ASCII file.
Modifying the Configuration and Its Statements
activate Activate a previously deactivated statement or identifier.
annotate
Add a comment to a statement.
copy
Copy and add a statement to the configuration.
deactivate Deactivate a statement or identifier.
delete Delete a statement or identifier from the configuration.
insert Insert an identifier into an existing hierarchy.
rename
Rename an existing statement or identifier.
set Create a statement hierarchy and set identifier values.
Navigating the Configuration Hierarchy
edit Move inside the specified statement hierarchy.
exit Exit the current level of the statement hierarchy (same function as quit).
quit Exit the current level of the statement hierarchy (same function as exit).
top
Return to the top level of configuration mode.
up
Move up one level in the statement hierarchy.
Miscellaneous
help Provide help about statements.
run
Issue an operational mode command without leaving configuration mode.
show Display the current configuration.
status
Display the users currently editing the configuration.
commands, display output.
show
),
|