Monitoring System Properties - Juniper J2300 User Manual

J-series™ Services Router User Guide

Monitoring System Properties

The system properties include everything from the name and IP address of
the Services Router to the resource usage on the Routing Engine. To view
these system properties, select Monitor>System in the J-Web interface,
or enter the following CLI
Table 73 summarizes key output fields in system properties displays.
Table 73: Summary of Key System Properties Output Fields
Field Values
System Identification
Serial Serial number for the J-series Services Router.
Number
JUNOS
Version of JUNOS software active on the Services
Software Router.
Version
Router
Hostname of the Services Router, as defined with the
Hostname
set system hostname command.
Router IP
IP address, in dotted decimal notation, of the Ethernet
Address
management port (fe-0/0/0), as defined with the set
interfaces fe-0/0/0 command.
Loopback IP address, in dotted decimal notation, of the
Addresses loopback address, as defined with the set interfaces
lo0 command.
Domain
IP addresses, in dotted decimal notation, of the
Name
domain name servers, as defined with the set system
Servers
name-server command.
Time Zone
Time zone of the Services Router, as defined with the
set system time-zone command.
System Time
204
Using the Monitoring Tools
Monitoring Routing Information on page 210
Monitoring Firewalls on page 214
Monitoring IPSec Tunnels on page 216
Monitoring NAT Pools on page 217
show
show system uptime
show system users
show system storage
show system processes
commands:
Additional Information