Monitoring Firewalls - Juniper J2300 User Manual

J-series™ Services Router User Guide
Field Values
Rip info Information about RIP on the specified interface,
including UDP port number, hold-down interval
(during which routes are neither advertised nor
updated), and timeout interval.
Logical Name of the logical interface on which RIP is
interface configured.
Routes
Number of RIP routes learned on the logical interface.
learned
Routes
Number of RIP routes advertised on the logical
advertised
interface.
RIP Neighbors
Neighbor Name of the RIP neighbor.
State State of the RIP connection: Up or Dn (Down).
Source Local source address.
Address
Destination
Destination address.
Address
In Met
Value of the incoming metric configured for the RIP
neighbor.

Monitoring Firewalls

Firewall information is divided into multiple parts:
214
Using the Monitoring Tools
To view stateful firewall information in the J-Web interface, select
Monitor>Firewall>Stateful Firewall. To display firewall information for
a particular address prefix, port, or other characteristic, type or select
information in one or more of the Narrow Search boxes, and click OK.
Additional Information
This value is the name of the interface on which RIP
is enabled. The name is set in either of the following
ways:
In the J-Web configuration editor,
on the Protocols>RIP>Group>
group-name >Neighbor page
In the CLI configuration editor, with the
neighbor neighbor-name statement at the
[edit protocols rip group group-name ] level of
the configuration hierarchy
This value is the configured address of the interface
on which RIP is enabled.
This value is the configured address of the immediate
RIP adjacency.