Self-Adhesive Labels - Intermec EasyCoder PD41 User Manual

Appendix B — Media Specifications

Self-Adhesive Labels

a: Media Width
Maximum:
Minimum:
b: Liner
The liner must extend evenly on both sides and not more than a total
of 1.6 mm (0.06) inches outside the face material.
c: Label Width (excluding liner)
Maximum:
Minimum:
d: Label Length
8 dots/mm (203 dpi)
Maximum:
Minimum:
11.81 dots/mm (300 dpi)
Maximum:
Minimum:
* This is the print length limit set by memory constraints.
e: Label Gap
Maximum:
Minimum:
Recommended:
The Label Gap sensor must be able to detect the front edges of
the labels. It can be moved 0 to 57 mm (0 to 2.24 inches) from
the inner edge of the media.
Paper Type Setup
• Labels with Gaps
62
118.0 mm
25.0 mm
116.4 mm
23.8 mm
Fingerprint
1270 mm (50 in.)* 600 mm (23 in.)
6 mm (0.2 in.)
558.8 mm (22 in.)* 406.4 mm (16 in.)
6 mm (0.2 in.)
26.0 mm
1.2 mm
3.0 mm
EasyCoder PD41 Printer User's Guide
4.65 inches
1.00 inches
4.58 inches
0.94 inches
IPL
6 mm (0.2 in.)
6 mm (0.2 in.)
1.02 inches
0.05 inches
0.12 inches