Intermec EasyCoder PD41 User Manual page 59

Extended Testmode: 7b - Test Label Function
Data/
Step Ready Error
7b 1
Press Print button and hold it to exit Testfeed Mode Slow function,
and return to step 6.
Extended Testmode: 7c - Dumpmode Function
Data/
Step Ready Error
7c 1
The printer will autohunt the communucation ports.
Tap the button to exit.
Press >1 second to save dumpmode info.
1
Press button and hold it to exit this function and return to Step 6.
Extended Testmode: 7d - Factory Default Function
Data/
Step Ready Error
7d 1
Lift the printhead, tap the Print button, and lower the printhead.
LEDs will flash.
Tap the button. Printer will start resetting to factory defaults. This is
indicated by scrolling LEDs.
EasyCoder PD41 Printer User's Guide
Chapter 5 — Setting up the Printer
RtW Button Comment
1
RtW Button Comment
1
1
1
RtW Button Comment
1
LEDs flash once per
second.
Tap the Print button, once
for each of 7test labels.
LEDs flash once per
second.
Tap the Print button to
start Dumpmode.
LEDs flash once per
second.
LEDs flash once per
second.
LED flashes once per
second, indicating factory
default reset is done.
49