Low - Intermec EasyCoder PD41 User Manual

Chapter 5 — Setting up the Printer
Extended Testmode: Selecting Function
Data/
Step Ready Error
3 flash flash
4
5
6 Release the button when LED combination corresponding to
your choice of function flashes. Then see corresponding
function table below.
7a 0 0
7b 0 1
7c 0 1
7d 1 0
7e 1 1
The functions 7a-7e are described on the next page.
Extended Testmode: 7a - Testfeed Mode Slow Function
Data/
Step Ready Error
7a
Press Print button and hold it to exit Test Label function and return to
Step 6.
48
RtW Button Comment
flash 0
flash
1
1
0
1
0
1
RtW Button Comment
1
1
1
EasyCoder PD41 Printer User's Guide
LEDs flash fast four times,
in four-second intervals.
Lower the printhead.
Press the Print button and
hold.
Testfeed Mode Slow
function
Test Label function.
Dump mode function.
Factory default function.
Exit Extended Testmode.
LEDs flash once per
second.
Tap the Print button to
start Testfeed (Mode slow).
Test label is printed.
LEDs flash once per
second.