Intermec EasyCoder PD41 User Manual page 91

Appendix D — Setup Parameters (IPL)
• 4800
• 9600 (default)
• 19200
• 38400
• 57600
• 115200
Character Length
The character length specifies the number of bits that will define
a character. Eight bits are recommended, since that option allows
more special characters and characters that are used exclusively in
foreign languages. Refer to the IPL Programmer's Reference
Manual for more information.
• 7 (Characters ASCII 000 to 127 decimal)
• 8 (Characters ASCII 000 to 255 decimal). Default.
Parity
The parity decides how the firmware will check for transmission
errors. There are five options:
• None (default)
• Even
• Odd
• Space
Stop Bits
The number of stop bits specifies how many bits will define the
end of a character. There are two options:
• 1 (default)
• 2
EasyCoder PD41 Printer User's Guide 81