Intermec EasyCoder PD41 User Manual page 60

Chapter 5 — Setting up the Printer
Extended Testmode: 7d - Factory Default Function
Data/
Step Ready Error
Press the button > 1 second to perform testfeed. When done, printer
will be ready for use (out of Testfeed mode.)
Extended Testmode: 7e - Exit
Data/
Step Ready Error
7e 1 1
The LEDs flash rapidly, and printer is ready for use.
50
RtW Button Comment
RtW Button Comment
1 1
1
EasyCoder PD41 Printer User's Guide
LEDs flash once per
second.
Tap the Print button to exit
Extended Testmode.