Print Button - Intermec EasyCoder PD41 User Manual

Chapter 2 — Operating the Printer
The green Ready/Data indicator will be turned on, off or flash
depending on the printer's current state. The behavior of the
green Data/Ready and red Error LEDs is shown in the table
below.
Ready/Data and Error LED behavior
State
Power Off
Upgrading
Testmode
Extended Testmode
PUP
Idle
Application running
Printing
Printing (wait for LTS) Quick flashes
Paused
Error
Footnotes on flashing LED behavior:
1 Flashing with 50% duty cycle, 0.8 second period when receiving
data, synchronized with Ready-to-Work LED.
2 Two fast flashes, 1.6 second period.
3 Flashing with 50% duty cycle, 0.8 second period, not synchronized
with Ready-to-Work LED.
4 Error LED will be lit for Out of Paper, Out of Ribbon, Head
Lifted, Cutter Error and Testfeed not Done conditions. Will flash
as (2), when thermal printhead is too hot. Will flash as (3) for
other error conditions caught by the Direct Protocol error handler.

Print Button

The Print button has different functionality depending on the
printer's state. Different actions can be specified by pressing the
button less than and more than one second respectively.
24
Ready/Data
Off
LEDs turned on one after the other.
See Chapter 5 for description.
See Chapter 5 for description.
On
1
On/Flash
On
1
On/Flash
2
3
Flash
Off
EasyCoder PD41 Printer User's Guide
Error
Off
Off
Off
Off
Off
Off
Off
4
On / Flash