Easy Print Command Format - Intermec 6804DM Technical Reference Manual

SECTION 5
3. If you are upgrading from version 2.01, you will need
4. Be sure that your Easy Print "Print" command strings
5. Be sure that the format is correct for your Easy Print

Easy Print Command Format

You must follow the exact format for Easy Print commands:
{Command, Global Options:@row,col:Name,Field Op-
tions|data|}
If anything is wrong in the Easy Print request, the image
will not print
1. Be sure you use the correct names for Global and
2. A colon ":" follows the dot row and dot column infor-
3. If the column numbers are too large for the receipt pa-
to alter your application program substituting Easy
Print commands for any "Template" commands you
may have previously used.
refer only to fonts and bar codes that you have down-
loaded.
or Line Printer Mode commands. Refer to Chapter 6
for the escape sequences involved in Line Printer
Mode and for the English--like commands used in
Easy Print. Remember the rules below when formulat-
ing an Easy Print command.
Field options (e.g. "QSTOPn" or "WIDEn" where "n" is
a number in the proper range). A typo in the global or
field option (e.g. "VNULT" instead of "VMULT") will
cause the command to be ignored.
mation (e.g. where the image will be printed on the
receipt or label). There can be no spaces either before
or after a colon.
per, or the print request skips from one row to a row
too much further down the paper, the print request
will be unsuccessful.
Intermec Portable Printers Technical Reference Manual
Maintenance and Troubleshooting
5-5