Intermec 6804DM Technical Reference Manual page 79

SECTION 4
QSTOPnnn
Format: QSTOPnnn (1 < nnn < 65000) (6805a, 6806, and
6804)
Function: Stop nnn dot lines after sensing "Q" mark. Af-
ter the mark has been found, the paper advances for "nnn"
dot lines and stops (even if the image is not yet complete.)
If, however, there is no "Q" mark on the paper, the printer
continues its search. See also the "STOP" option for use as
a safeguard.
Example:
" NOTE:
The "Q" must be positioned so that it does not sit under the sensor
when the paper is properly aligned. See Appendix A, for more on the
Qmark.
ROT270
Format: ROT270
Function: Will rotate image so that the left--hand edge of
the landscape image prints first.
Example:
STOP nnn
Format: STOP nnn
Function: Use the STOP option to advance the paper to
the proper point for tearing. This options stops the paper
"nnn" dot lines after the beginning of the label or receipt.
The data "nnn" sent after the STOP option specifies the to-
tal number of dot lines high for this print image. For exam-
ple, for the 680x series, which have a 203 DPI mechanism,
specifying "STOP 500" will give a 2.5" total height image
from the top of the paper to where it has stopped under the
print head.
The STOP option can be used with the QSTOP option. Set
the STOP to stop the printing just after the stop using the
QSTOP option. This way, the paper will always stop ad-
{PRINT,QSTOP500:@10,30:MF107|Hi world| }
{PRINT,ROT270:@10,30:MF107|Hi world| }
Intermec Portable Printers Technical Reference Manual
Operation
Qstop Global Option
ROT270 Global Option
Stop Global Option
( 1 < nnn < 65000)
4-31