6804 And 6808 Series Of Printers; Figure 4-3 Paper Fold - Intermec 6804DM Technical Reference Manual

SECTION 4
4. Grab the tip and pull it through until the paper is
5. Push down the paper lever and insert the plastic pa-
6. Place the narrow end of the rod into the small hole on
7. Snap the wider end into the cutout on the opposite
8. Turn the paper knob clockwise to tighten the paper
9. Replace the end boot and tear off extra paper.

6804 and 6808 Series of Printers

1. Lift up the paper release lever. This takes the pres-
2. Take the edge of the paper and fold it 45 degrees.
straight.
per rod through the center of the paper roll.
the side of the paper cavity.
side of the paper cavity.
slack in the cavity.
sure off the platen. Make sure you have a clean edge
on the new paper roll.
Fold
Figure 4-3
Paper Fold
Intermec Portable Printers Technical Reference Manual
Operation
4-5