Self Test Description - Intermec 6804DM Technical Reference Manual

Self Test
Self Test
Batt Volt
Batt Temp
Flash/RAM
Boot Version
Prnhd Tmp
Infrared
Device Name
Device Nick-
name
IrDA Ver
Available
Fonts
Available
Graphics
Available Bar
Codes
Card Reader
Option
2-2 Intermec Portable Printers Technical Reference Manual
Table 2-1 (continued)
Query Quick Reference
Description
Current voltage of the batter y pack.
Temperature of the battery.
1 Meg or 4 Meg Flash/ 1 Meg or 4 Meg RAM
Boot sector firmware.
Temperature of print head (between 0 and 50 degrees).
Set by the user to "Off", "IrDA", "ASK", "ASK/CRC", "Di-
rect", "Direct CRC", "PULSE", or "PULSE--CRC"
Shows type of device (i.e. 680x)
Shows user name for printer.
The 1.0 refers to the IrDA standard in use. The next two
digits refer to any IR modifications made to the configura-
tion.
"LOC" shows whether a font is Resident (R) or Downloaded
(D). "CPI" shows characters per inch. "DESCRIPTION"
describes the font. "NAMES" give the "Easy Print" name,
the Line Printer name, and the hexadecimal equivalent of
that name.
"LOC" shows whether a font is Resident (R) or Downloaded
(D). "CPI" shows characters per inch. "DESCRIPTION"
describes the graphic. "NAMES" give the "Easy Print"
name, the Line Printer name, and the hexadecimal equiva-
lent of that name.
All supported barcodes supported are displayed. "DE-
SCRIPTION" describes the graphic. "NAMES" give the
"Easy Print" name, the Line Printer name, and the hexa-
decimal equivalent of that name.
Shows the current Card Reader configuration.
SECTION 2