Pci Riser Card Assembly And Backwall - HP Compaq dx7300 MT Reference Manual

Removal and Replacement Procedures— Slim Tower (ST) Chassis

7.10 PCI Riser Card Assembly and Backwall

1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock
(Section 7.2).
2. Prepare the computer for disassembly
3. Remove the computer cover
4. Remove all PCI and PCI Express expansion cards from the PCI expansion slots
(Section 7.9).
5. Rotate the optical and diskette drive cage to its upright position.
6. Remove the security clip
position 1, then lift the power supply straight up and out of the chassis 2.
7–18
(Section 7.1).
(Section 7.5).
(Section 7.4.1), rotate the power supply to its full upright
43361 1-001 Service Reference Guide, dx7300