Installing A Drive In A Front-Access Shelf - HP Vectra VT6 User Manual

Before Installing an
IDE Device
NOTE
3 How to Install Accessories Inside Your PC
Installing Disk Drives

Installing a Drive in a Front-Access Shelf

These instructions explain how to install a drive (such as a disk drive, a
CD-ROM drive, or a tape drive) in one of the front-access drive shelves.
You should also refer to the manual supplied with the drive for any
additional installation instructions.
Refer to the drive's installation guide to see if you must set jumpers or if
there is a special installation procedure to follow.
Drives ordered from HP are supplied with mounting rails. If you order
your drive from another supplier, you may need to order drive mounting
rails from HP.
You should order product number D2880A for 5.25-inch disk drive rails
or product number D3566A for 3.5-inch disk drive rails.
70 English