Connecting The Power Cords - HP Vectra VT6 User Manual

NOTE
1 Setting Up Your PC

Connecting the Power Cords

Connecting the Power Cords
1 If fitted, remove the warning label covering the computer's power
connector on the rear of the computer.
2 Check that the voltage selection switch has been correctly
configured for your country.
You should not have to change the voltage selection switch setting if the
computer was ordered from HP with the correct localisation option for
your country.
6 English
Voltage
Selection Switch
If the voltage
selection is
incorrect for your
country, select the
correct voltage
110 V or 230 V