HP Vectra VT6 User Manual page 68

Plug and Play
ISA Accessory Boards
Non-Plug and Play ISA
Accessory Boards
3 How to Install Accessories Inside Your PC
Installing Accessory Boards
Configuring Accessory Boards with Windows 95
Windows 95 can detect and configure automatically Plug and Play
accessories if
Plug and Play Device Management
the Setup program.
You must run the Add New Hardware wizard to configure non-Plug and
Play accessories. The Add New Hardware wizard can identify
automatically many accessory boards.
If the Add New Hardware wizard does not recognize the accessory
board, you can manually select the accessory board from a list of
supported products. Windows 95 is preloaded with configuration
details for many non-Plug and Play accessory boards.
Windows 95 will determine the recommended settings for each ISA
non-Plug and Play board you want to install. These settings may be
different from those recommended by the accessory board's
manufacturer. In this case, the board's jumper settings and driver
options must be altered.
To run the Add New Hardware wizard:
1 Click the Start button on the Windows 95 task bar.
2 Point to Settings.
3 Double-click Add New Hardware.
4 Follow the instructions provided by the Add New Hardware wizard
to configure the accessory board.
56 English
is set to in
Full