Installing Windows 95 - HP Vectra VT6 User Manual

Preparing to Install
Windows 95
Installation Procedure
Installing the MGA
Video Driver
1 Setting Up Your PC
Installing an Operating System

Installing Windows 95

These instructions explain how to install the US English version of
Windows 95 (for PCs without Windows) on a HP Vectra PC with an IDE
hard disk. For complete Windows 95 installation information, consult
the manual that came with your Windows 95 diskettes.
Before attempting to install Windows 95:
1 Start your PC and press
2 Highlight
Operating System
key to save the setting and exit the Setup program.
Install Windows 95 from the Windows 95 (for PCs without Windows)
installation disks, following the instructions in the manual supplied with
the Windows 95 diskettes.
1 Insert the "XU/VT Drivers and Documentation CD-ROM" in the CD-
ROM drive.
2 Double-click on the
3 Double-click on the CD-ROM drive icon, then on the
on the folder named
4 Execute the file named
PowerDesk Setup).
5 Click on the
Next
6 Click on the
Next
the
MGA Monitor Program
7 Click in the
OK Information . . .
8 Click in the next dialog box, when asked to use the Windows 95
OK
monitor mechanism.
9 Click when a message explains that the driver has been installed.
OK
10 Click on the
Start
18 English
to enter the Setup program.
and select
icon on the Windows 95 desktop.
My Computer
.
Disk 6
(to start the MGA Millennium
Setup
button to accept the default destination path.
button to confirm the installation of
.
window.
button of the
MGA Change Display Wizard
. Press the
Windows 95
folder, then
Video
Quick Access
.
and