If The Cd-Rom Drive Has A Problem - HP Vectra VT6 User Manual

Hp vectra vt6: users guide
Hide thumbs Also See for Vectra VT6:
Table of Contents

Advertisement

No Sound from the
CD-ROM Drive
CD-ROM Drive is Idle
WARNING
4 Troubleshooting Your PC and Using the Setup Program

If the CD-ROM Drive Has a Problem

If the CD-ROM Drive Has a Problem
Check that the software is correctly installed and the system correctly
configured before removing your computer's cover to check the CD-
ROM cable connections and jumper settings.
If you are having problems with sound when playing a CD:
Check that the volume control (if present) on the CD-ROM drive
front panel is not set to the minimum.
Ensure that the disk in the CD-ROM drive is an audio disk and not a
Photo CD or data CD.
If using headphones or external speakers, check that they are
properly connected (see chapter 1).
Check that the CD audio cable is correctly installed and is connected
to the system board.
If the CD-ROM drive does not appear to be working, try accessing the
disk by clicking on the CD-ROM drive icon or drive letter assigned to the
CD-ROM drive by your operating system.
Be sure to disconnect the power cord from your computer before you
remove the cover to check the cable connections or jumper settings.
98
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra vt 6/xxx

Table of Contents