Loading A Cd; Ejecting A Cd When The Open/Close Button Is Disabled - HP Vectra VT6 User Manual

Loading a CD

1 Press the Open/Close button to open the CD drawer.
2 Place the CD, label side facing up, in the recess in the drawer.
3 Press the Open/Close button to close the drawer. The drawer can
also be closed by gently pushing the drawer back into the drive.
4 To remove the CD, press the Open/Close button to open the drawer.
Remove the CD. Press the Open/Close button to close the drawer.

Ejecting a CD When the Open/Close Button is Disabled

If the Open/Close button is disabled by software or a power failure, use
this procedure to remove a CD:
1 Turn off the PC.
2 Insert a straight rod (for example, a straightened paper clip) into the
emergency eject hole next to the Open/Close button. The drawer
should eject by about 15mm.
3 Pull out the drawer by hand until the CD can be easily removed.
4 Remove the CD.
5 Push the drawer gently back into the drive.
2 Using Your PC
Using Your CD-ROM Drive
English 39