NOTE
Using the HP Setup Program
Setup is an integrated (ROM-based) program that displays the PC's
configuration. Configuration information for associated PC features is
grouped together to make it easier to find.
Check the configuration when you first use the PC and each time after
you install, remove, or upgrade accessories.
If you are unable to change the PC's configuration, check that you
entered the correct password when you started Setup.
Starting the Setup Program
1 Turn on the PC and the display.
If the PC is already turned on, save your data and exit all programs,
then press
2 Press
while
appears for only a few seconds, just after the beeps
<Setup=F2>
signalling the end of the self-test.
4 Troubleshooting Your PC and Using the Setup Program
and
to restart the PC.
Delete
is displayed on the screen.
<Setup=F2>
Using the HP Setup Program
<Setup=F2>
English
99