Using The Hp Setup Program - HP XM600 - Kayak - 128 MB RAM Troubleshooting Manual

First, Turn On or Restart
Your PC Workstation
To Go to the Setup
Program

Using the HP Setup Program

The Setup program allows you to view and change the configuration of
your PC Workstation, such as the passwords and boot device order.
Follow these instructions to check the configuration.
If your PC Workstation is off, turn on the display and then the PC
Workstation.
If the PC Workstation is already turned on, save your data, exit all
programs and restart your PC Workstation. For Windows NT 4.0,
Windows 95 or Windows 98, use the
command in the
Start
operating system and restart the PC Workstation.
To go into the Setup program, press
on your display.
.
Shut Down
menu. This command will automatically exit the
while the "Kayak" logo appears
F2
Configuration Problems
Using the HP Setup Program
Õ
Restart your computer
37