Using The Hp Setup Program; Starting The Setup Program - HP VECTRA XW User Manual

NOTE
3 Troubleshooting Your PC Workstation and Using the Setup Program

Using the HP Setup Program

Using the HP Setup Program
Setup is an integrated (ROM-based) program that displays the PC
Workstation's configuration. Configuration information for associated
PC Workstation features is grouped together to make it easier to find.
Check the configuration when you first use the PC Workstation and
each time after you install, remove, or upgrade accessories.
If you are unable to change the PC Workstation's configuration, check
that you entered the correct password when you started Setup.

Starting the Setup Program

1 Turn on the PC Workstation and the display.
If the PC Workstation is already turned on, save your data, shut
down your operating system, and restart the PC Workstation.
2 Press while
<Setup=F2>
appears for only a few seconds, just after the beeps
<Setup=F2>
signalling the end of the self-test.
72 English
is displayed on the screen.
<Setup=F2>