Hp Setup Program - HP Vectra VL series 8 Maintenance Manual

First, Turn On or Restart
Your PC
To Go to the HP
Summary Screen
To Go to the Setup
Program
3 Troubleshooting Your PC

HP Setup Program

HP Setup Program
Follow these instructions to check your PC's configuration when you
first use the PC:
If your PC is off, turn on the display and then the PC.
If the PC is already turned on, save your data, exit all programs and
restart your PC. For Windows NT 4.0 or Windows 95, use the
Down – Restart your computer
command will automatically exit the operating system and restart the
PC. For operating systems such as Windows NT 3.51, you must exit the
operating system and then manually switch off and then on the PC,
using the power on/off button.
While the Vectra logo appears on your display, press
you to the HP Summary Screen. The Summary Screen will appear for
only a short time. To retain the screen indefinitely (until you decide to
leave it), press .
The summary screen shows the basic configuration of your PC, such as
the amount of main memory.
To go immediately into the Setup program while the Vectra logo
appears on your display (and bypass the Summary Screen), press
instead of .
The Setup program allows you to view and change the configuration of
your PC, such as the passwords and standby (power saving) mode.
42 English
command in the
Start
Shut
menu. This
. This will take