HP Kayak XA05 Supplementary Manual page 60

Completing the
Installation of an ISA
Accessory Board
NOTE
2 How to Install Accessories In Your Minitower PC Workstation
Installing Accessory Boards
7 Secure the board by replacing the slot cover screw.
If you loosened the screws on adjacent slots, remember to tighten
them.
Secure the board
in position
8 Install any other accessories before replacing the cover (see page
27). Reconnect all cables and power cords.
If you have installed an ISA accessory board that uses any interrupt,
you must run the Setup program and reserve the IRQ for the accessory
board.
1 Turn on the PC Workstation and press
2 In the Setup program, select the
submenu. A list of IRQs and the devices that use them are
Exclusion
displayed. Highlight the IRQ field you want to change, for example
.
IRQ 11
3 You can use the space bar or press
for PCI (
Available
4 Press to save any changes you made and exit the Setup program.
F3
You should always leave at least one IRQ available for use by the
integrated PCI devices.
50 English
F2
Advanced
or
F7
) or make it unavailable for PCI (
when
F2 Setup
menu and the
ISA Resource
to make the IRQ available
F8
Reserved
appears.
).