HP Kayak XA05 Supplementary Manual page 18

1 How to Install Accessories In Your Desktop PC Workstation
Installing Memory
4 Remove the fan underneath and place it on top of the power supply.
The location of the memory module slots is shown below.
5 Slide the memory module into the slot at 90° to the system board
(with the cutouts furthest away from the processor).
Slide the memory module into the
o
slot at 90 to the system board
6 Firmly press the memory module completely into the connector
until the retaining clips click into position.
8 English
Memory module
cutouts
Push the module until the
retaining clips click into position