Moving The Power Supply - HP Kayak XA05 Supplementary Manual

Moving the Power Supply

You can slide the power supply unit out of the computer to improve
access to the system board and the cables at the rear of the disk drives.
1 Disconnect the computer's power cord and any LAN cable.
2 Remove the computer's cover (see page 27).
3 Remove the fan connection to the system board.
Fan connection to
system board
HP UltraFlow
Airflow Guide
Retaining button
4 Press the retaining buttons on each side of the HP UltraFlow airflow
5 Unscrew the four self-retaining screws at the back of the power
Unscrew the
self-retaining screws
guide and lift it out of the PC Workstation's case.
supply.
2 How to Install Accessories In Your Minitower PC Workstation
Moving the Power Supply
English 31