Moving The Power Supply - HP Kayak XA05 Supplementary Manual

Lift the front of
the power supply
up and forwards.
WARNING

Moving the Power Supply

You can move the power supply unit out of the computer to improve
access to the system board and the cables at the rear of the disk drives.
1 Disconnect the computer's power cord and any LAN cable.
2 Remove the computer's cover (refer to page 3).
3 Lift the front of the power supply up and move it forwards to
disengage the hinge on the rear.
4 Rotate the power supply and lay it upside down on the drive unit.
To avoid electrical shock, do not open the power supply. There are no
user-serviceable parts inside the power supply unit.
1 How to Install Accessories In Your Desktop PC Workstation
Moving the Power Supply
English 5