HP Kayak XA05 Supplementary Manual page 96

4 Technical Information
System Connectors and Switches
Switch 1 is reserved and should not be used. Its default position is Up.
Switches 2 through 5 are used for processor settings as shown in the
following table and should be changed if the processor supplied with
the PC Workstation is replaced with a faster one.
Switch 2 Switch 3
1
UP UP
UP DOWN
UP DOWN
UP DOWN
1. UP=OFF, DOWN=ON.
Switches 6 to 10 are used as shown in the following table:
1
Switch
Use Switch to:
1 - RESERVED Do not use.
6 - CLEAR CMOS Retain or clear CMOS memory:
• UP to retain CMOS memory — DEFAULT
• DOWN to clear CMOS memory.
7 - PSWRD Enable or clear (and disable) User and System Administrator
Passwords stored in EEPROM:
• UP to enable passwords — DEFAULT
• DOWN to clear passwords.
8 - KEYB power on Enable or disable power on using the keyboard:
• UP to disable keyboard power on
• DOWN to enable keyboard power on — DEFAULT
86 English
Switch 4 Switch 5
DOWN DOWN
UP UP
UP DOWN
DOWN UP
Bus Processor
Speed Speed
100 MHz 350 MHz
100 MHz 400 MHz
100 MHz 450 MHz
100 MHz 500 MHz