HP Kayak XA05 Supplementary Manual page 44

2 How to Install Accessories In Your Minitower PC Workstation
Installing Memory
5 Remove the airflow guide covering the processor sockets (if
6 Remove the transparent SCSI holder to provide easy access to the
7 The location of the memory module slots is shown here.
8 Slide the memory module into the slot at 90° to the system board
Slide the memory module
o
into the slot at 90 to the
system board
9 Firmly press the memory module completely into the connector
34
needed).
memory module slots.
(with the cutouts furthest away from the processor).
Memory module
cutouts
until the retaining clips click into position.
English
SCSI holder
Push the module until
the retaining clips click
into position