Replace The Cover - HP Kayak XA05 Supplementary Manual

Check Internal Items
Power CPU
CPU error
No RAM, RAM type
Temp disk, Temp CPU,
Temp IO slot
Fan CPU, Fan IO slot
Power/Power supply
No video
If the PC Workstation still does not start properly, follow this procedure
to check the internal items:
1 Turn off the display, the computer, and all external devices.
2 Unplug all power cords and cables, noting their positions. Disconnect
the PC Workstation from any telecommunications network.
3 Remove the cover and check the following items:
LCD Error Messages
- Check all internal cables.
- Check that the status panel is correctly
connected to the system board
Check that the processor is correctly
installed.
Reset the PC Workstation or power-off
the LAN.
Check that the memory modules are
correctly installed.
- Check that accessory boards are firmly
seated in their slots.
- Verify that any switches and jumpers
on the accessory boards are properly
set.
- Check that the switches on the system
board are properly set.
Check fans and that air flow guide is
not blocked.
Check that fans are installed correctly.
Check that power supply is properly
connected.
Check that the video card is properly
installed.

4 Replace the cover.

5 Reconnect all cables and power cords.
3 Troubleshooting Your HP Kayak PC Workstation
If Your PC Workstation Does Not Start Properly
Action
Ensure they are correctly attached and
firmly in place.
Ensure that both connectors are
correctly attached and firmly in place.
Ensure it is firmly in place.
Refer to your PC User's Guide for more
information.
Refer to "Installing Memory" page 7.
Refer to "Installing Accessory Boards"
page 21.
Refer to the manuals that came with
each board.
Refer to "System Board Switches"
page 85.
Refer to the illustration on page 5.
Refer to the illustration on page 5.
Refer to "Replacing the Power Supply
after Installing Accessories" on page 6
Refer to the manual that came with
the video card.
Reference
English 59