Installing A Hard Disk Drive In An Internal Shelf - HP Kayak XA-s 02xx Manual

NOTE
HP Kayak XA-s 02xx PC Workstation - Installing Accessories In Your HP Desktop PC Workstation

Installing a Hard Disk Drive in an Internal Shelf

The internal shelves can house one hard disk drive that is up to
1.6-inches in height, and one hard disk drive up to 1-inch in height.
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover (refer to page 3).
3 Remove the four (outer) retaining screws from the top of the hard
drive unit.
4 Lift the hard drive unit partly out of the PC Workstation's case and
disconnect the data and power connectors from the existing drive.
5 Remove the hard drive unit from the PC Workstation's case.
6 Place the hard drive unit carefully on a flat surface.
Take care when handling the hard disk drive and ensure that it is
placed on an anti-static bag whenever you set it down.
Installing Mass Storage Devices
Remove the four outer
retaining screws
English
13