Installing Mass Storage Devices; Connecting Devices - HP Kayak XA05 Supplementary Manual

2 How to Install Accessories In Your Minitower PC Workstation

Installing Mass Storage Devices

Installing Mass Storage Devices

Connecting Devices

If you add an IDE Zip drive, hard disk drive, CD-ROM drive, CD-RW
drive, or tape drive, you need to connect it to power and data cables.
The data cables and connectors provided are shown below:
Cable with one connector for
3.5-inch Flexible Disk Drive
On selected models, a 16-bit
External 68-pin SCSI connector
36 English
On selected models, a
16-bit SCSI with five
68-pin SCSI connectors
34-pin connector
Cable with two 40-pin connectors for
IDE Drives, such as CD-ROM Drives,
Zip Drives or Hard Disk Drives.
Power Cables for Hard Disk
Drives, Zip Drives, Tape Drives,
CD-RW, and CD-ROM Drives
Power Cable for 3.5-inch
Flexible Disk Drive