Installing Memory; Main Memory Modules - HP Kayak XA05 Supplementary Manual

CAUTION
Fan connection to
system board
HP UltraFlow
Airflow Guide
Retaining button

Installing Memory

Main Memory Modules

If you need more main memory, you can install up to 768 MB of
memory in three 100 MHz DIMM slots.
Main memory upgrades are available in single non-buffered 32 MB,
64 MB, 128 MB or 256 MB SDRAM memory modules.
Static electricity can damage electronic components. Turn off
all equipment. Do not let your clothes touch the accessory.
To equalize the static electricity, rest the accessory bag on top
of the power supply while you are removing the accessory from
the bag. Handle the accessory as little as possible and with care.
To install a main memory module:
1 Disconnect the computer's power cord and any LAN or
telecommunications cable.
2 Remove the computer's cover (see page 27).
3 Remove the fan connection to the system board.
4 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation's case.
2 How to Install Accessories In Your Minitower PC Workstation
Installing Memory
English 33